Availability: | |
---|---|
Quantity: | |
GD-0754
GOLD
GD-0754
Introduction:
The Cohesion Tester is designed and made as per EN 12274-4; ASTM D3910 and T 0754-2011 “Cohesive Force Test for Slurry Mixtures” in the Traffic Standard of People’s Republic of China JTG E20-2011. The Cohesion Tester is used to confirm the initial setting time and opening time of slurry mixtures .
Features:
1.The cohesion tester adopts desktop structure .Novel design ,reasonable structure and convenient to use .
2.The structure design of the instrument ,the specification size of the test apparatus ,act ,each meets the requirement of T 0754-2011 standard .
3.The cohesion tester is convenient to carry. And it can be used both in lab and on site ,and it widely used in the construction organizations, scientific research institutes to analysis and confirm the emulsified asphalt and aggregate bond degree .
Specifications:
Rubber pad diameter | Ф28.6mm |
Rubber pad thickness | 6.4mm |
Rubber pad hardnes | HRC60 |
The maximum pressure | 1Mpa |
The circular test mode | Ф60mm × 6mm; Ф60mm × 10mm |
Torque wrench | (0 ~ 5) N. m |
Dimension | 535 mm × 205 mm × 420 mm (length × width × height) |
Power supply | AC (220 ± 10%) V; 50Hz |
Optional Accessories:
Balance | Weighing 500g, the sense of it not more than 0.1g |
Oven | With forced ventilation, temperature can be controlled at (60 ± 3) ℃ |
You may also need the following testing equipment:
GD-4508C/GD-4508G-1 Bitumen Ductility Machine
GD-2801F/H Low-Temperature Penetrometer
GD-2806G/H Automatic Softening Point Tester
GD-0653 Emulsified Asphalt Particles Ionic Charge Tester
GD-0654 Emulsified Asphalt Adhesiveness Tester
GD-0655 Emulsified Asphalt Storage Stability Tester
GD-0751 Emulsified Asphalt Consistency Tester
GD-0752 Wet Wheel Abrasion Tester
GD-0754 Cohesion Tester
GD-0755 Load Wheel Rolling Tester
Introduction:
The Cohesion Tester is designed and made as per EN 12274-4; ASTM D3910 and T 0754-2011 “Cohesive Force Test for Slurry Mixtures” in the Traffic Standard of People’s Republic of China JTG E20-2011. The Cohesion Tester is used to confirm the initial setting time and opening time of slurry mixtures .
Features:
1.The cohesion tester adopts desktop structure .Novel design ,reasonable structure and convenient to use .
2.The structure design of the instrument ,the specification size of the test apparatus ,act ,each meets the requirement of T 0754-2011 standard .
3.The cohesion tester is convenient to carry. And it can be used both in lab and on site ,and it widely used in the construction organizations, scientific research institutes to analysis and confirm the emulsified asphalt and aggregate bond degree .
Specifications:
Rubber pad diameter | Ф28.6mm |
Rubber pad thickness | 6.4mm |
Rubber pad hardnes | HRC60 |
The maximum pressure | 1Mpa |
The circular test mode | Ф60mm × 6mm; Ф60mm × 10mm |
Torque wrench | (0 ~ 5) N. m |
Dimension | 535 mm × 205 mm × 420 mm (length × width × height) |
Power supply | AC (220 ± 10%) V; 50Hz |
Optional Accessories:
Balance | Weighing 500g, the sense of it not more than 0.1g |
Oven | With forced ventilation, temperature can be controlled at (60 ± 3) ℃ |
You may also need the following testing equipment:
GD-4508C/GD-4508G-1 Bitumen Ductility Machine
GD-2801F/H Low-Temperature Penetrometer
GD-2806G/H Automatic Softening Point Tester
GD-0653 Emulsified Asphalt Particles Ionic Charge Tester
GD-0654 Emulsified Asphalt Adhesiveness Tester
GD-0655 Emulsified Asphalt Storage Stability Tester
GD-0751 Emulsified Asphalt Consistency Tester
GD-0752 Wet Wheel Abrasion Tester
GD-0754 Cohesion Tester
GD-0755 Load Wheel Rolling Tester