GD-0613A Automatic Breaking Point Tester
1. Our automatic breaking point tester is used to determine the temperature which a bitumen tends to break rather to flow when cooled and stressed as per standards GB/T 4510 and JTG E20-2011.
2. It can do three tests at the same time in the same environment and calculate the average value. The cooling rate is controlled by computer.
1. It is controlled by micro computer. The cooling rate is controlled automatically.
2. It automatically timing to bend samples. The test data is shown on the colored LCD and outputted by built-in printer.
|Refrigeration mode||Low temperature circulatory bath|
|Temperature measuring range||-30℃～25℃|
|Temperature measuring error||±0.5℃|
|Test samples||It can determine 3 samples at the same time.|
|Ambient temperature||Room temp. ～+30℃|
|Power consumption||450W（breaking point tester）+ 1600W（low temperature circulatory bath）|
|Overall dimension||500mm×400mm×570mm（breaking point tester）|