Bitumen Types:Penetration grade bitumen:Penetration Grade Bitumen is a standard bitumen usually used as a Paving Grade Bitumen essential for road construction and some industrial applications.The penetration grading system was developed in the early 1900s to characterize the consistency of semi-soli.
Maximum weighing: 220 g/ 320g, accuracy: 0.1 mg / 1 mg, repeatability: ±0.1 mg /±1 mg, linearity: ±0.2 mg /±2 mg, weighing pan size: Φ90mm
Oxygen bomb calorimeter is designed and made as per ASTM D240, ASTM D5865. It is suitable to determine the calorific value of water-free oil products(gasoline, jet fuel, diesel oil and fuel oil, etc) and combustible materials such as coal, coke, paraffin wax content.
1. Rotational viscosity test 2. Rotating film oven test: 3. Pressure aging Oven test (PAV): 4. Dynamic shear rheological test (DSR) 5. Bending beam rheological test (BBR) 6. Tensile testre4) Water da
What is Octane number and Cetane number?Octane number：Octane number is used to measure a fuel's ability to resist"Knocking" or "Pinging"during combustion, caused by the air/fuel mixture detonating prematurely in the engine. Cetane number：Cetane number is an indicator of the combustion speed of diese
What is Flash Point and How to Test the Flash Point
For petroleum products low temperature tester series, we have cold filter plugging point tester, solidifying point teste, pour point tester, cloud point tester and freezing point tester.
ASTM D445, KINEMATIC VISCOMETER, kinematic viscosity test
Multifunctional Penetrometer for Grease / Wax / Bitumen, ASTM D5, ASTM D217, ASTM D1321.