Availability: | |
---|---|
Quantity: | |
GD-2801H
GOLD
GD-2801I
GD-2801H Automatic Penetrometer ( Low Temperature Multifunctional Type)
Introduction:
The Automatic Penetrometer is designed and made as per the standards GB/T4509 Standard Test Method for Penetration of Bitumen, T0604 Bitumen Penetration Test in the standard JTG E20-2011 Specifications and Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering and ASTM D5.
The Automatic Penetrometer is suitable to determine the penetration of highway bitumen, modified asphalt, as well as liquid petroleum asphalt or residue of emulsified asphalt after evaporation.
Features:
1. Measurement accuracy of the instrument can reach to 0.6 penetrations.
2. New type penetrometer detection unit, and the test repeatability is stable.
3. It adopts high resolution capacitance touch screen, the information can be clearly displayed.
4. Special "Computer Drawing Software + Data Accurate Reading Technology", it can automatically draw and print the nomogram of asphalt penetration relationship.
5. It adopts new type lifting device.
Specifications:
Penetration Tester Parameters:
1. Measurement range: 0 penetration~600 penetrations;
2. Resolution: 0.1 penetration;
3.Timing range: 0s~60 s, and the error is less than ±0.1 s.
4. Heating power: 200 W;
5. Standard needle: 50mm, 2.5g±0.05g (basic configuration)
6. Bracket lifting frame: Double lifting adjustment mechanism, easy to point the sample plane
7. Dimensions: 280mm * 350mm * 700mm (length * width * height)
Constant Temperature Bath Parameters:
1. Bath volume: 5.5L
2. Temperature range: (5.0 ~ 100.0)℃
3. Constant temperature accuracy: ±0.1℃
4. Total power consumption: no more than 1800W
5. Dimensions: 420mm * 380mm * 900mm (length * width * height). Power supply AC(220±10%)V;50Hz
Note: The standard configuration is according to JTG E20-2011 standard. Other configurations are purchased separately according to the requirements of the user when ordering.
GD-2801H Automatic Penetrometer ( Low Temperature Multifunctional Type)
Introduction:
The Automatic Penetrometer is designed and made as per the standards GB/T4509 Standard Test Method for Penetration of Bitumen, T0604 Bitumen Penetration Test in the standard JTG E20-2011 Specifications and Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering and ASTM D5.
The Automatic Penetrometer is suitable to determine the penetration of highway bitumen, modified asphalt, as well as liquid petroleum asphalt or residue of emulsified asphalt after evaporation.
Features:
1. Measurement accuracy of the instrument can reach to 0.6 penetrations.
2. New type penetrometer detection unit, and the test repeatability is stable.
3. It adopts high resolution capacitance touch screen, the information can be clearly displayed.
4. Special "Computer Drawing Software + Data Accurate Reading Technology", it can automatically draw and print the nomogram of asphalt penetration relationship.
5. It adopts new type lifting device.
Specifications:
Penetration Tester Parameters:
1. Measurement range: 0 penetration~600 penetrations;
2. Resolution: 0.1 penetration;
3.Timing range: 0s~60 s, and the error is less than ±0.1 s.
4. Heating power: 200 W;
5. Standard needle: 50mm, 2.5g±0.05g (basic configuration)
6. Bracket lifting frame: Double lifting adjustment mechanism, easy to point the sample plane
7. Dimensions: 280mm * 350mm * 700mm (length * width * height)
Constant Temperature Bath Parameters:
1. Bath volume: 5.5L
2. Temperature range: (5.0 ~ 100.0)℃
3. Constant temperature accuracy: ±0.1℃
4. Total power consumption: no more than 1800W
5. Dimensions: 420mm * 380mm * 900mm (length * width * height). Power supply AC(220±10%)V;50Hz
Note: The standard configuration is according to JTG E20-2011 standard. Other configurations are purchased separately according to the requirements of the user when ordering.