ASTM D942 IP142 Automatic Grease Oxidation Stability Tester

ASTM D942 IP142 Automatic Grease Oxidation Stability Tester

Why perform the grease oxidation stability test?

(1) Monitor changes in the oxidative stability of the lubircating grease to prevent more organic acids from being generated as a result of oxidative deterioration of the lubricant, causing corrosion of the lubricated parts of the equipment.

(2) Prevent more sludge, gum and asphaltene produced by the serious oxidation of lubricating oil, increasing the viscosity of lubricating oil, which is not conducive to the lubrication and heat dissipation of the equipment. Also prevents the flow of lubricating oil due to excessive oil sludge blocking the oil circuit and affecting the flow of lubricating oil, increasing the wear and tear of the equipment.

(3) oxidative deterioration of lubricating grease will also make the oil additives cracking failure, so that the oil of the relevant physical and chemical properties of deterioration, such as oil foam, emulsification, anti-wear properties will be significantly reduced.

(4)The oxidative stability of lubricating grease depends most of all on the quality of the base oil.

Key Features:

1.The whole test of Grease Oxidation Stability Tester is controlled by computer, no need for manual conduct.

2.The test process has curve real-time display.

3.The results are automatically stored at the end of test.

4.A test bomb can be loaded into 5 specimen dishes.

5.Stainless steel electric heater, heating bath.

6.The Grease Oxidation Stability Tester can automatically check the gas leakage and alarm prompts.

7.PID program temperature control technology, digital display, precision ± 1 ℃ PT100 sensor.

8.64-bit PIC acquisition card, fast sampling speed, rapid results processing.

9.LCD interface using human-computer dialogue.

10.Alloy steel dish rack, containing 18% chromium, 8% nickel.

Parameters:

We can supply all lubricating oil / grease testing equipment, welcome to inquiry!